VOC Catalysts

Non-Precious-Metal VOC Catalyst — YC-XB-C

Product model: YC-XB-C

A silver-copper-manganese composite oxide honeycomb catalyst offering a lower-cost catalytic oxidation option for suitable VOC streams.

YC-XB-C non-precious-metal Ag-Cu-Mn VOC oxidation catalyst product photo
Product photo — Xuanbao Environmental
YC-XB-C non-precious-metal VOC catalyst specification sheet — Ag-Cu-Mn active components, 260–450°C, design conversion ≥98%

Overview

YC-XB-C uses Ag/Cu/Mn composite oxides instead of platinum-group metals. It targets cost-sensitive applications and non-hydrocarbon VOC streams where the operating conditions fall within its window. Suitability must be confirmed by testing against the actual VOC composition.

Technical Data

ParameterSpecification
SubstrateCordierite
Size100×100×50 mm
Cell density200 cpsi
Active componentsAg / Cu / Mn
Water absorption<25%
Axial strength≥10 MPa
Lateral strength≥2 MPa
Operating temperature260–450°C
Maximum temperature500°C
Space velocity10,000–15,000 h⁻¹
Concentration range1,500–4,000 mg/m³ *
Design conversion≥98%
Expected service life>1 year

Values shown are manufacturer specifications or typical values unless marked (*). Parameters marked (*) are reproduced from source documentation and may contain unit or OCR ambiguities — they are reference values only and must be confirmed against the current product specification before use in engineering design. Design values are confirmed per project after operating conditions are reviewed. Please contact us for current data sheets.

Key Features

  • No platinum-group metals — lower material cost
  • Suitable for non-hydrocarbon VOC streams
  • Good thermal stability within its window

Typical Applications

  • Non-hydrocarbon VOC catalytic oxidation
  • Cost-sensitive VOC abatement projects

Application Limits & Conditions

Concentration range marked (*) carries a unit ambiguity in the printed source. Conversion and service life are manufacturer brochure values. Because the system contains no precious metals, light-off temperature is higher and the applicable VOC range is narrower. Halogenated compounds and high-humidity streams require prior evaluation.

Data to Provide for a Quotation

To receive a material recommendation and quotation, please share your operating conditions:

  • Gas flow rate (Nm³/h) and inlet / target outlet concentration
  • Gas composition and main pollutant components
  • Operating temperature and humidity
  • SO₂ and dust concentration (where applicable)
  • Existing reactor dimensions and current catalyst / adsorbent type
  • Required service life and any special requirements

FAQ

Frequently Asked Questions

When should I consider the non-precious-metal catalyst?

When the VOC stream is suitable (non-hydrocarbon, within 260–450°C) and material cost is a major constraint. We test your gas composition before confirming applicability.

Discuss this product for your gas conditions

Send us your operating conditions — we will confirm applicability and return a material recommendation.